• 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
  • :+91-9312-871-070
RO Membrane Cleaner for Silica Fouling in Chennai - Innova Corporate India

Advanced Cleaner For Silica Fouled Membranes in Chennai

Innova Corporate (India) is a specialized manufacturer, supplier, and exporter of high-performance Cleaners for Silica Fouled Membranes in Chennai. Silica scaling is one of the most feared problems in RO membrane maintenance — unlike calcium or iron scales, silica deposits form a hard, glass-like layer that ordinary acid cleaners cannot dissolve. Chennai's borewell water in Sriperumbudur, Oragadam, and Poonamallee frequently carries silica above 30 ppm, making effective silica cleaning essential for plant uptime.

Our Silica Membrane Cleaner is a purpose-engineered alkaline formulation that dissolves polymerized silica and silicate scales without damaging the membrane's active layer. It penetrates deep into silica deposits, breaks them into soluble compounds, and lifts them off the membrane surface — restoring permeate flux and lowering differential pressure. For Chennai plants operating at high recovery, this translates directly into lower energy bills and longer membrane life.

For Chennai facilities, we recommend a dosage of 2–4% solution (v/v) in RO permeate water, with a soak time of 30–60 minutes. In severe silica fouling — common in plants using high-silica borewell water without adequate pretreatment — a longer soak of up to 2 hours may be required. Our technical team provides customized cleaning protocols based on actual water analysis.

What makes silica cleaning in Chennai particularly challenging is the way silica interacts with everything else in the feed water. Borewells drawing from the granite formations beneath Sriperumbudur and Oragadam release dissolved silica that, once it crosses saturation in the reject stream, polymerises into a network of silicon-oxygen bonds — essentially a thin layer of glass fused to the membrane surface. Adding to the problem, the same water often carries iron and hardness that co-deposit with the silica, creating a mixed fouling layer that resists single-chemistry cleaners. Standard acid cleaning (low pH) actually accelerates silica polymerisation by driving the equilibrium towards deposition. Standard alkaline cleaning alone cannot break the polymerised network. Our formulation uses a specifically buffered alkaline system with dispersing agents that swell the silica layer, break the silicon-oxygen bonds, and hold the released silica in solution so it can be flushed out before it can re-polymerise. For plants running at high recovery above 75% — where silica concentration in the reject reaches its highest — this chemistry is often the difference between recovering a fouled membrane and replacing it.

Key Features & Strategic Benefits in Chennai:

  • Polymerized Silica Removal: Advanced alkaline formulation dissolves hard, glass-like silica scales that acid cleaners cannot touch.
  • Silicate Deposit Control: Effective against complex silicate compounds formed from Chennai's high-silica groundwater.
  • Flux Restoration: Returns fouled membranes to near-original permeate flow and salt rejection.
  • Lowers Differential Pressure: Reduces pressure drop across membrane elements — cutting energy costs.
  • Membrane Compatibility: Safe for all major brands — Dow, Hydranautics, Toray, Koch — across RO and NF systems.
  • Reduces Downtime: Cuts cleaning cycles by up to 60% and extends cleaning intervals for Chennai plants.
  • Cost-Effective: Prevents premature membrane replacement — saving up to 70% on membrane costs.
  • Anti-Repolymerisation Action: Dispersing agents hold released silica in solution, preventing it from depositing again on downstream membrane elements during the cleaning cycle.

Technical Specifications

Parameter Value / Description
Appearance Clear to slightly hazy liquid
pH (1% solution) 10.0 to 11.5 (alkaline)
Specific Gravity 1.08 to 1.18
Water Solubility Completely Soluble
Silica Removal Capacity Effective up to 50 ppm silica in feed water
Recommended Dosage 2–4% v/v in RO permeate
Soak Time 30–60 minutes (up to 2 hours for severe fouling)
Shelf Life 24 months from date of manufacturing
Packaging 5L, 20L, 50L, 200L HDPE drums

Applications in Chennai

High-Silica Borewell Water Sriperumbudur, Oragadam, Poonamallee industrial belts
Industrial RO Plants Textile, pharmaceutical, food processing, power plants
Automotive & Manufacturing Sriperumbudur, Oragadam, Maraimalai Nagar corridors
High-Recovery Systems Plants operating above 75% recovery with silica in feed
Commercial RO Systems Hotels, hospitals, IT parks across Chennai

Safety & Protocol: To maintain the highest safety standards during application in Chennai, personnel should wear industrial-grade splash goggles, lab coats, chemical-resistant gloves, and boots. In the event of skin contact, wash immediately with water. For eye contact, flush thoroughly and seek immediate medical attention. For comprehensive safety data, please refer to the Material Safety Data Sheet (MSDS).

Storage & Stability: For our clients in Chennai, this product should be stored in its original, hermetically sealed containers in a cool, dry location. Keep away from direct sunlight, heat sources, and open flames. For detailed shelf-life information and application guidelines, please consult the Technical Data Sheet (TDS).

Pricing & Supply

Price Starting from ₹300/litre for bulk orders
Custom Pricing Available for 200L+ drums and export orders
Delivery Pan-India dispatch in 3-5 days
Export Packaging Available for international buyers