Innova Corporate (India) is a leading manufacturer, supplier and exporter of high-grade membrane biocide in Egypt. We offer the finest quality membrane treatment solutions at highly competitive prices for local industries — from Nile-fed industrial plants in Cairo and the Delta region to Red Sea and Mediterranean desalination facilities. Our chemical formulations are engineered using pure raw materials, meeting global industrial quality standards to ensure maximum protection for your RO systems in Egypt.
Our specialized range includes both oxidizing and non-oxidizing microbiocides, engineered for the disinfection of RO, NF and UF membranes across Egypt. The formulation features a precise molecular weight range and a clear, impurity-free composition. This advanced chemistry effectively eliminates bacterial, algal and biofilm contamination while remaining compatible with the polyamide and TFC membranes used in Egypt's growing desalination and industrial RO fleet. The non-oxidizing variant is the preferred choice for continuous feed-side dosing, while the oxidizing variant serves potable water and CIP applications where potable-safety compliance is required.
Membrane biocide selection in Egypt depends on the specific application and membrane type. Oxidizing biocides provide rapid microbial kill and are well-suited for pretreatment disinfection of potable water systems, raw water intake treatment, and CIP cycles where contact time is controlled. They are effective against a broad range of organisms and break down quickly after use. Non-oxidizing biocides are the preferred choice for continuous dosing in membrane systems — they do not attack polyamide or TFC membrane active layers, provide extended residual protection through the system, and are effective against biofilm-forming organisms that resist oxidizing chemistries. For Egypt's SWRO plants and Nile-fed industrial facilities, non-oxidizing biocides are the standard for continuous feed-side protection. For potable water systems, oxidizing biocides offer superior safety and regulatory compliance. Many facilities use both — oxidizing for periodic shock treatment and non-oxidizing for continuous protection.
| Parameter | Oxidizing Biocide | Non-Oxidizing Biocide |
|---|---|---|
| Primary Application | Pretreatment, potable water | Continuous membrane protection |
| Membrane Compatibility | Requires controlled dosing | Fully compatible with all membranes |
| Residual Protection | Short-lived | Extended (days to weeks) |
| Biofilm Penetration | Limited | Excellent |
| Typical Dose (Continuous) | Not recommended | 1 – 5 ppm |
| Typical Dose (CIP/Shock) | 5 – 100 ppm | 50 – 200 ppm |
| Potable Water Approved | Yes (specific products) | Yes (specific products) |
A large industrial RO facility near Sadat City, drawing from a Nile-fed canal source, was using only oxidizing biocide for both pretreatment and periodic CIP. The plant was facing recurring problems: biofilm formation on first-stage membranes despite regular cleaning, occasional membrane performance loss after CIP (likely from chlorine exposure during the disinfection cycle), and declining salt rejection on the lead elements after 22 months of operation. The facility adopted a mixed biocide program using Innova's non-oxidizing biocide at 2 ppm continuous dosing into the feed line, plus the oxidizing biocide for periodic shock treatment during extended shutdowns (with proper membrane isolation). Over the following 12 months, biofilm formation on first-stage membranes dropped to negligible levels, no further membrane performance loss after CIP was observed, and the affected membranes recovered significant salt rejection. The facility now runs a documented two-product biocide program with clear guidance on when to use each chemistry. The sister facility in the 10th of Ramadan industrial area adopted the same approach.
Regular application of our microbiocides in Egypt not only ensures sterile water output but also significantly extends the life of your membranes by preventing irreversible biological fouling. These products are highly effective even at low concentrations, making them a cost-efficient choice for industrial and municipal water plants in Egypt. Whether you operate a single RO train on Nile-fed water or a multi-site desalination network on the Red Sea and Mediterranean, our biocide portfolio gives you the flexibility to address every microbial control scenario with the correct chemistry.
Q1: How do I choose between oxidizing and non-oxidizing biocide for my Egypt plant?
The choice depends on the application. For continuous protection of SWRO and industrial RO membranes,
non-oxidizing biocide is the standard choice because it does not damage polyamide or TFC membranes.
For pretreatment disinfection, raw water treatment or potable water systems, oxidizing biocide offers
rapid kill and regulatory compliance. Most Egypt facilities benefit from having both in their chemical
program.
Q2: Can I use oxidizing biocide for continuous dosing in my Egypt RO plant?
No. Oxidizing biocides like chlorine attack polyamide and TFC membranes and should not be used for
continuous dosing on the RO feed. They can be used for pretreatment (with proper dechlorination
downstream) or for shock treatment during shutdowns (with membrane isolation). For continuous
protection, use non-oxidizing biocide.
Q3: Are your biocides safe for potable water systems in Egypt?
Yes. Both our oxidizing and non-oxidizing biocide variants are available in formulations that comply
with drinking water safety standards. These are suitable for Egypt's municipal water supply systems,
hotel water systems, hospital water systems, and any facility producing drinking water from RO or
SWRO processes.
Q4: Do you supply membrane biocides across Egypt?
Yes. We supply across Egypt through Alexandria Port, Damietta Port and Port Said, with delivery to
Cairo, Alexandria, Giza, the Suez Canal Economic Zone, Sadat City, 10th of Ramadan, Borg El Arab and
other industrial areas. Standard packaging of 25 kg, 250 kg and bulk drums is available with regular
dispatch from India.
Storage & Handling: Store in original, tightly sealed containers in a cool, dry and well-ventilated area at your Egypt facility. Keep away from direct sunlight, heat sources and incompatible materials. Do not allow the product to freeze. For detailed dosing instructions, efficacy data and safety protocols, please refer to the Technical Data Sheet (TDS) and Material Safety Data Sheet (MSDS).