- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalants High Silica
RO Antiscalant for High Silica & Metal Oxides in Gurgaon
Silica is the foulant most plant operators in Gurgaon underestimate until it is too late. Borewell water across Udyog Vihar, IMT Manesar and the Sohna Road belt carries dissolved silica that stays invisible in routine analysis but polymerises into a hard, glass-like layer once it concentrates in the reject stream. By the time differential pressure climbs and permeate flow drops, alkaline CIP chemicals cannot touch the deposit. Innova Corporate (India) supplies a specialist RO Antiscalant for High Silica in Gurgaon that keeps silica in solution from the very first pass — before it gets a chance to bake onto the membrane surface.
The formulation is a clear, low-molecular-weight liquid that also handles the iron load common in older Gurgaon borewell networks along Pataudi Road and the industrial sectors around Sector 34 and Sector 37. Iron sequestration prevents the reddish-brown staining that otherwise follows silica fouling, while the silica-specific polymer blocks crystal growth even at high TDS and elevated recovery. The result is stable performance for auto component, food processing and pharmaceutical units across the region, without the constant fear of an irreversible silica event.
Key Features & Strategic Benefits in Gurgaon:
- Critical Silica Control: Prevents complex silica-based scales that are often irreversible once they set on the membrane.
- Iron Fouling Sequestration: Manages high iron content common in Gurgaon borewell water to prevent red-brown membrane staining and ferric hydroxide deposits.
- Optimized Recovery: Allows higher water recovery rates even when TDS and silica concentrations are elevated, which is the exact operating condition of most Gurgaon RO plants.
- Membrane Compatibility: Safe and compatible with all major brands of Polyamide, TFC and NF membranes used in the region.
- Environmentally Responsible: Fully organic and biodegradable formulation, keeping the discharge stream compliant with Haryana State Pollution Control Board norms.
- Maintenance Reduction: Drastically reduces the frequency of chemical cleanings and element replacements for Gurgaon plants, cutting both downtime and long-term operating cost.
Dosage & Application Guidelines for Gurgaon:
Dose the high silica antiscalant directly into the feed water line after pretreatment. Standard dosing ranges from 2 ppm to 20 ppm, depending on calcium hardness, iron, TDS and silica content at your Gurgaon facility:
- Moderate Hardness: 2-3 ppm is sufficient for alkalinity and hardness control.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 5-7 ppm to stabilize the system against Gurgaon's iron-rich borewell water.
- Extreme Silica (Up to 325 ppm): A dosage of approximately 10-15 ppm is recommended for full inhibition in the reject stream — this covers the worst-case silica levels seen in Udyog Vihar and IMT Manesar feeds.
Storage & Handling: Store in original, tightly sealed containers in a cool, dry environment at your Gurgaon site. Keep away from direct heat and sunlight. For customized dosing schedules based on your specific Gurgaon water analysis, consult our Technical Data Sheet (TDS) or reach out to our technical team for a site review.