- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalants High Silica
RO Antiscalant for High Silica & Metal Oxides in Kohima
Kohima's water source is unusual by Indian standards. The city draws mostly from mountain streams and natural springs cutting through schist and quartz-rich geology — water that's naturally soft (low TDS, low hardness) but carries silica that shows up quietly in RO systems and refuses to leave. Standard antiscalants tuned for calcium hardness don't address this. Add the monsoon factor — Kohima sits in one of India's heaviest rainfall zones, and silica content in surface water spikes measurably between May and September — and you have a silica fouling problem that most plants don't see coming until recovery drops and CIP frequency climbs. Innova Corporate (India)'s High Silica Antiscalant in Kohima is formulated for exactly this mountain-spring, monsoon-driven profile.
Our formulation extends the silica saturation limit, keeping reactive silica in solution through the membrane pass rather than allowing it to polymerize into the hard, glass-like scale that no CIP can remove. For Kohima's bottled water and packaged drinking water plants where source water silica is a constant, for food processing units handling local horticulture produce, and for hotels and hospitals running RO through peak tourist and monsoon seasons, this is the chemical that keeps recovery stable without tying up operations in endless cleaning cycles.
Key Features & Strategic Benefits in Kohima:
- Critical Silica Control: Prevents complex silica-based scales that are often irreversible — a direct benefit for Kohima's mountain-spring water sources.
- Iron Fouling Sequestration: Effectively manages iron content that appears in some of Kohima's spring-fed and older borewell sources, preventing red-brown membrane staining.
- Optimized Recovery: Allows for higher water recovery rates even with fluctuating silica concentrations — critical during Kohima's monsoon season.
- Membrane Compatibility: Safe and compatible with all major brands of Polyamide, TFC, and NF membranes.
- Environmentally Responsible: Completely organic and biodegradable formulation.
- Maintenance Reduction: Drastically reduces the frequency of chemical cleanings and element replacements for Kohima plants.
Dosage & Application Guidelines for Kohima:
High Silica RO Antiscalant should be dosed directly into the feed water line (after pretreatment). Standard dosage ranges from 2 ppm to 20 ppm, depending on Calcium Hardness, Iron, TDS, and Silica content in your Kohima facility:
- Moderate Hardness: 2-3 ppm is sufficient for alkalinity and hardness control.
- High Iron (0.5 - 1.0 ppm): Increase dosage by 5-7 ppm to effectively stabilize the system against iron-rich spring-fed sources in and around Kohima.
- Extreme Silica (Up to 325 ppm): A dosage of approximately 10-15 ppm is recommended for full inhibition in the reject stream — particularly relevant during the monsoon spike.
Storage & Handling: Store in original, tightly sealed containers in a cool and dry environment at your Kohima site. Keep away from direct heat and sunlight. For customized dosing schedules based on your specific Kohima water analysis, please consult our Technical Data Sheet (TDS) or reach out to our technical team.