Kota's industrial belt runs on a mixed water profile that is very different from the rest of Rajasthan. Borewells across Kota Industrial Area, DCM Road and the Jhalawar Road belt carry elevated organic load from textile dyeing, chemical processing and food production. On top of that, SDI values stay high through most of the year. The result is a fouling layer that builds on the membrane surface as a combination of organic matter, biological slime and oil residue — a mix that acid cleaners cannot touch. Innova Corporate (India) supplies a professional High pH Membrane Cleaner in Kota that strips away this composite fouling and restores flux to design levels, without harming the Polyamide or TFC membrane elements used across the region.
The alkaline formulation is engineered for the specific fouling pattern seen in Kota plants. It emulsifies organic foulants, breaks down biological layers and lifts colloidal clay off the membrane surface, holding everything in suspension so it can be flushed out during the CIP cycle. Textile processing units along DCM Road use it to clear dye residue and organic slime, while chemical and food plants in Kota Industrial Area rely on it for oil and biofilm control in their production loops.
Application Guidelines: For optimal restoration of systems in Kota, dilute with DM or permeate water to create a 2-5% v/v working solution. Recirculate the solution through the membrane system for 2-4 hours, allowing for a 30-60 minute soak period. Continue flushing with DM water until the pH level stabilizes at both the feed and permeate ends. If the solution becomes heavily turbid or fouled during the process, it should be replaced with a fresh batch.
Storage & Handling: Always shake the container well before use. Store in a cool, dry place in original packaging at your Kota facility. Refer to our Material Safety Data Sheet (MSDS) and Technical Procedure Sheet for detailed safety protocols and step-by-step cleaning instructions.