Organic fouling and bio-slime can drastically reduce the flux of RO membranes in Manesar's pharmaceutical and food sectors. Innova Corporate (India) manufactures a specialized High pH Membrane Cleaner in Manesar, designed to effectively remove organic matter, oils, and biological deposits that accumulate in Manesar's water systems.
This alkaline cleaner is essential for the CIP (Clean-In-Place) protocols of Manesar's manufacturing units. It emulsifies organic foulants and restores membrane performance without causing damage. For any RO operator in Manesar, this high pH cleaner is the key to maintaining a hygienic and efficient filtration process, preventing unpleasant odors and bio-film build-up in Manesar.
What makes organic fouling particularly aggressive in Manesar is the combination of water chemistry and industrial processes. The IMT Manesar belt, along with Bawal, Khushkhera and Neemrana, draws on Aravalli foothill groundwater that carries 600+ ppm hardness along with iron and silica. But hardness is only half the problem. The automotive paint shops, rinse lines and process water loops in this corridor introduce oils, surfactants, and biological matter into the feed water — either through process carryover or through the cooling tower and pretreatment systems that serve the plant. In the warm months from April through September, when ambient temperatures cross 40°C, microbial growth accelerates and biofilm forms on membrane surfaces within weeks rather than months. A high pH cleaner is the only chemistry that can break through this organic-biological layer. Standard acid cleaning alone leaves the biofilm intact — or worse, coagulates proteins and makes the deposit harder to remove. Our alkaline formulation was designed specifically for this Manesar-specific fouling pattern.
Application Guidelines: For optimal restoration of systems in Manesar, dilute with DM or permeate water to create a 2-5% v/v working solution. Recirculate the solution through the membrane system for 2-4 hours, allowing for a 30-60 minute soak period. Continue flushing with DM water until the pH level stabilizes at both the feed and permeate ends. If the solution becomes heavily turbid or fouled during the process, it should be replaced with a fresh batch.
Storage & Handling: Always shake the container well before use. Store in a cool, dry place in original packaging at your Manesar facility. Please refer to our Material Safety Data Sheet (MSDS) and Technical Procedure Sheet for detailed safety protocols and step-by-step cleaning instructions.