- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Antiscalant Balls
Slow-Release RO Antiscalant Balls for Mathura's Ashrams, Hotels & Dairy Units
Not every RO installation needs a full chemical dosing system. For smaller commercial setups and residential ashrams across Mathura and Vrindavan, a simpler solution often works better — one that requires no pumps, no dosing calculations, and no daily monitoring. Innova Corporate (India) supplies RO Antiscalant Balls designed exactly for this need. They sit inside the pre-filter housing and provide continuous scale protection through slow, steady dissolution.
The balls dissolve gradually as water flows through the housing, releasing a controlled dose of polyphosphate into the feed stream. There is nothing to adjust, nothing to top up daily, and nothing to calculate. It is a low-maintenance solution ideal for guest houses, temples, schools, dairies and small food units across the region that want to protect their membranes without adding complexity to their water management.
Double-Action Protection: These balls use advanced polyphosphate technology to inhibit scale deposition and stop corrosion at the same time. They form a microscopic protective layer on metallic surfaces, shielding pipes and heating coils from oxidative damage. A low concentration of just 2–3 ppm is sufficient to stabilise hard feed water and prevent mineral hardening inside the RO system.
Key Features & Strategic Benefits for Local Installations:
- Energy Efficiency: Prevents scale on boiler coils — just 1mm of scale can increase energy costs by 15%.
- Corrosion Inhibition: Effective in Galvanized, Copper, and even Plastic piping systems used across the region.
- 100% Active Substance: Highly concentrated formula with zero fillers for maximum efficiency.
- Scale Softening: Gradually removes existing brown scale (Iron Oxide) common in local pipelines and older plumbing.
- Potable Safe: Non-toxic and safe for use in tap water and fresh water applications, including drinking water systems.
Technical Specifications
| Parameter | Value / Specification |
|---|---|
| Purity | 71.0% min |
| pH Value | 3.5 – 4.0 |
| Average Weight | 10 +/- 0.5 gm per ball |
| Dissolution Rate | 0.03 – 0.05 g / 24 hours |
| Water Insoluble | 0.06 % max |
| Heavy Metals (as Pb) | 8 ppm max |
| Iron Content | 40 ppm max |
Storage & Handling: Store in a cool, dry place. These balls are designed for slow dissolution; ensure proper water flow through the housing for optimal results at your site. For more details on shelf life and application, please refer to our Technical Data Sheet (TDS) and MSDS.