Innova Corporate (India) is a leading manufacturer, supplier, and exporter of high-grade RO Dechlorination Chemicals in Maharashtra. Residual chlorine can cause irreversible damage to sensitive Thin Film Composite (TFC) and Polyamide membranes. Our specialized liquid de-chlorinator is formulated to rapidly neutralize free chlorine in Maharashtra's water systems, ensuring total membrane safety and operational longevity for industrial plants across Maharashtra.
Our RO De-chlorinator in Maharashtra is a concentrated, stabilized liquid designed for the complete elimination of residual chlorine prior to the RO system. By removing strong oxidizing agents, it prevents membrane degradation, maintaining the rejection performance and flow rate of your water treatment plant in Maharashtra.
Managing chlorine across Maharashtra is more complex than in most Indian states, because the feed water chemistry varies so dramatically from region to region. The Konkan coastal belt — Palghar, Raigad, Ratnagiri, Sindhudurg — deals with high humidity and municipal water that is heavily chlorinated to control biological growth in the distribution network. The Deccan trap plateau — Nashik, Aurangabad, Kolhapur, Solapur, Sangli and the entire Marathwada region — draws on hard basaltic groundwater that is often chlorinated on-site by plant operators to control iron bacteria and sulfate-reducing organisms. The Vidarbha region around Nagpur and Amravati relies on reservoir systems with variable chlorine residuals that shift with the season. Across all these zones, the industrial plants that feed on MIDC supply, municipal water or mixed industrial feed face the same risk: TFC and polyamide membranes that contact free chlorine above 0.1 ppm for sustained periods suffer irreversible oxidation, and the damage only becomes visible weeks later when permeate quality has already drifted. Our stabilized liquid dechlorination chemistry is engineered to perform across Maharashtra's full spectrum of feed water conditions.
What makes our formulation particularly practical for Maharashtra plants is its stability under the state's variable climatic conditions. Coastal facilities deal with year-round humidity and salt-laden air that can degrade powder-based dechlorinators. Inland plants in Nashik and Aurangabad face 40°C+ summers that accelerate chemical degradation. Vidarbha plants deal with monsoon humidity swings that affect powder storage. Our stabilized liquid holds full reducing activity across all these conditions, reacts with free chlorine almost instantaneously, and requires no powder handling or special storage arrangements. For plants that must demonstrate compliance with MPCB discharge norms and maintain BIS potable water standards, the liquid formulation also provides more accurate dosing control than powder alternatives.
The dosage depends on the residual chlorine levels and contact time. Typically, the dosage ranges from 3 ppm to 15 ppm for Maharashtra water conditions.
Always wear proper safety gear, including splash goggles, lab coats, gloves, and vapor respirators. In case of skin contact, wash immediately with water. Store in original containers in a cool, dry place at your Maharashtra facility, away from direct sunlight and heat sources. Recommended storage temperature is between 5°C to 40°C. Keep containers tightly sealed when not in use. Refer to the MSDS for comprehensive safety data.
*Note: As a company policy, Innova Corporate recommends consulting our service engineers in Maharashtra for precise dosage requirements based on your specific water chemistry. The product has a shelf life of 12 months from the date of manufacturing when stored under recommended conditions.