- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of High pH Membrane Cleaner
Professional High pH Membrane Cleaner for Doha's Desalination & Industrial RO Systems
Organic fouling is the quiet problem in every RO plant. It does not show up as dramatic scale on the membrane surface — instead, it builds gradually as biofilm, algae, oil residues and colloidal matter accumulate on the feed side. In the high-temperature desalination environment of the Gulf, this build-up happens faster than almost anywhere else. Innova Corporate (India) manufactures a High pH Membrane Cleaner engineered specifically for this challenge in Doha, Mesaieed, Ras Laffan and Umm Alhoul.
The formulation is alkaline by design — it dissolves organic films, disperses colloidal clay, and lifts biological slime off membrane surfaces without attacking the membrane material itself. Unlike acid cleaners (which target mineral scale), this high pH cleaner is what you reach for when the problem is organic. It is low-foaming, highly concentrated, and compatible with RO, NF and UF membranes from every major manufacturer.
Key Features & Strategic Benefits for Local Plants:
- Superior System Clean-up: High pH formulation specifically targets organic matter and silica scales found in Gulf desalination systems.
- Colloidal Dispersion: Penetrates deep into biological films and colloidal clay for complete removal.
- Low Foaming Formula: Engineered for seamless use in high-velocity recirculation cleaning methods.
- High Concentration: Delivers exceptional results even at low dilution ratios, making it highly cost-effective for large-scale plants.
- Eco-Friendly & Biodegradable: Safe for the environment and complies with modern wastewater discharge norms.
- Versatile Application: Fully compatible with a wide range of RO, Nanofiltration (NF), and Ultrafiltration (UF) membranes.
Application Guidelines: For optimal restoration of systems, dilute with DM or permeate water to create a 2–5% v/v working solution. Recirculate the solution through the membrane system for 2–4 hours, allowing for a 30–60 minute soak period. Continue flushing with DM water until the pH level stabilises at both the feed and permeate ends. If the solution becomes heavily turbid or fouled during the process, it should be replaced with a fresh batch.
Where It Is Used in the Region:
Plants across Doha's industrial belt rely on this cleaner as a standard part of their CIP programme. Common applications include:
- Desalination plants — removing biofilm and organic films from SWRO membranes between acid cleaning cycles.
- LNG and gas processing facilities — cleaning RO systems fed by seawater with seasonal organic load.
- Power and utility plants — maintaining membrane performance in high-temperature operating conditions.
- Petrochemical complexes — cleaning membranes in process and cooling water treatment systems.
- Food and beverage plants — organic fouling removal in high-BOD feed water applications.
- Municipal water plants — periodic alkaline cleaning to maintain flow and rejection performance.
Storage & Handling: Always shake the container well before use. Store in a cool, dry place in original packaging at your facility. Please refer to our Material Safety Data Sheet (MSDS) and Technical Procedure Sheet for detailed safety protocols and step-by-step cleaning instructions.