- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Disinfectant Chemicals
RO Disinfectant Chemical for Doha's SWRO Membrane Sanitization
Biological fouling is the silent killer of RO membrane performance. Biofilm begins as a thin, invisible layer on the membrane surface — but in Doha's warm seawater conditions, it can spread within weeks and cause measurable flux decline. Worse, biofilm protects bacteria from many cleaning chemicals, making it progressively harder to remove. Innova Corporate (India) manufactures a non-oxidising RO disinfectant engineered to eliminate this problem in industrial plants across Mesaieed, Ras Laffan and Umm Alhoul.
The formulation is a broad-spectrum microbiocide that works by disrupting microbial cell function rather than oxidising it. This is critical for Polyamide and TFC membranes — chlorine and other oxidisers would destroy them, but this non-oxidising chemistry leaves the membrane fully intact. It penetrates established biofilm, breaks it down, and flushes it out during the cleaning cycle. The result is restored performance and a sanitised system ready for continued operation.
Key Features & Strategic Benefits for Local Plants:
- Broad-Spectrum Efficacy: Highly effective against a wide range of microorganisms, preventing bio-fouling and pressure drops in high-load SWRO systems.
- Potable Water Safe: Certified safe for use in RO systems producing drinking water when used as per guidelines.
- Non-Oxidizing Formula: Unlike chlorine, it does not oxidise or degrade Polyamide or TFC membranes.
- Eco-Friendly & Biodegradable: Environmentally responsible formulation that breaks down safely after use, meeting the region's discharge standards.
- Total System Compatibility: Fully compatible with all RO membrane components, housings, and high-pressure pumps.
Application & Dosage Guidelines:
Dosage depends on the severity of biological fouling. We recommend two primary methods for industrial facilities:
- Shock Dosing (Immediate Disinfection): Use a concentration of 5–10% v/v for rapid system sterilisation during shutdowns.
- Continuous Dosing (Preventative): Maintain a concentration of 2.5 ppm on the feed water for round-the-clock microbial control.
Where It Is Used in the Region:
Plants across Doha's industrial belt rely on this disinfectant as a standard part of their membrane hygiene programme. Common applications include:
- SWRO desalination plants — sanitising membranes where microbial contamination would affect water quality.
- LNG and gas processing facilities — controlling biofilm in process water systems.
- Power and utility plants — protecting membrane systems fed by warm seawater with high seasonal microbial loads.
- Drinking water and packaged water plants — ensuring microbial safety in potable applications.
- Cooling tower and utility water systems — controlling bio-slime that affects heat exchange efficiency.
- Food and beverage plants — sanitising membranes in process water applications where hygiene is critical.
Recommended Membrane Cleaning Protocol:
- Disinfect the system with Innova RO Disinfectant.
- Flush thoroughly with permeate water.
- Circulate a High pH Membrane Cleaner solution for 30 minutes, then soak for 1–2 hours.
- Final flush with permeate water before returning the plant to normal service.
*Note: In multi-pass systems, clean each pass individually for the best results. Replace cleaning solutions if they become excessively turbid.*
Safety & Handling: Proper PPE (splash goggles, lab coats, gloves, and vapor respirators) must be worn. Store in original containers in a cool, dry place at your site, away from direct heat or sunlight.