- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of RO Dechlorination Chemicals
RO Dechlorination Chemical for Doha's SWRO Desalination & Industrial RO Systems
Chlorine is essential at the front end of every seawater desalination plant — it controls biofouling in intake structures and feed pipelines. But the same chlorine becomes a serious hazard for the RO membranes downstream. A few ppm of residual free chlorine is enough to oxidise a polyamide layer within days, silently destroying the very membranes the plant is built around. Innova Corporate (India) manufactures a high-purity RO Dechlorination Chemical that solves this problem for desalination and industrial plants across Doha, Mesaieed, Ras Laffan and Umm Alhoul.
The formulation is a stabilised liquid — not a powder, not a generic sodium bisulfite solution. It reacts almost instantly with free chlorine and other oxidising agents, converting them into harmless compounds that pass safely through the RO train. Because the chemistry is stabilised, it performs consistently even in the Gulf's high ambient temperatures, where conventional dechlorinators often degrade. The result is a membrane that stays chemically intact for its full design life.
Key Features & Strategic Benefits for Local Plants:
- Rapid Neutralization: Stabilised formula ensures near-instant action in neutralising free chlorine in the feed water.
- Critical Membrane Protection: Guards Polyamide and TFC membranes against oxidative degradation and chemical "burning" in SWRO treatment facilities.
- Liquid Precision: Unlike conventional powders, our liquid formula is easy to handle, store, and dose with high accuracy at any site.
- Enhanced Stability: Significantly more stable and effective than traditional sodium bisulfite solutions — particularly in high-temperature Gulf conditions.
- System Longevity: Prevents premature membrane replacement costs by shielding against chlorine attack.
Application & Dosage Guidelines:
The dosage depends on the residual chlorine levels and contact time. Typically, the dosage ranges from 3 ppm to 15 ppm depending on the feed water conditions:
- Injection Point: Should be dosed as close to the RO system as possible (e.g., before cartridge filters).
- High Chlorine Strategy: If free chlorine is high, dose the dechlorinator prior to antiscalant injection, as chlorine can neutralise the effectiveness of antiscalants.
- Safe Mixing: Avoid mixing neat (concentrated) dechlorinator and antiscalant directly; ensure dosing points are properly spaced in your plant setup.
Where It Is Used in the Region:
Plants across Doha's industrial belt rely on this chemical as a standard part of their seawater pretreatment. Common applications include:
- SWRO desalination plants — neutralising chlorine after intake chlorination and before cartridge filtration.
- LNG and gas processing facilities — protecting RO membranes in process water systems fed by chlorinated seawater.
- Power and utility plants — ensuring chlorine-free feed water to boiler feed RO systems.
- Petrochemical complexes — dechlorination in cooling water make-up and process water treatment.
- Municipal water plants — final dechlorination before distribution to consumers.
- Food and beverage plants — protecting membranes in process water applications where chlorine-free feed is mandatory.
Handling & Safety Measures:
Always wear proper safety gear, including splash goggles, lab coats, gloves, and vapor respirators. In case of skin contact, wash immediately with water. Store in original containers in a cool, dry place at your facility, away from direct sunlight and heat sources.
*Note: As a company policy, Innova Corporate recommends consulting our service engineers for precise dosage requirements based on your specific water chemistry.