- 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
- :+91-9312-871-070
Manufacturers, Exporters, Suppliers of Peracetic Acid Based RO Disinfectant
Peracetic Acid Based RO Disinfectant in Singapore (Eco-Friendly Sterilant)
Singapore's pharmaceutical hubs in Tuas and Jurong, along with its food and beverage processing belt, need water that meets the highest microbiological purity standards. Innova Corporate (India) supplies a Peracetic Acid (PAA) Based RO Disinfectant in Singapore that delivers complete sterilization without leaving chemical residue in the treated water — a critical requirement for pharma-grade and potable applications across Singapore.
Unlike conventional chlorine-based disinfectants that corrode stainless steel and form harmful by-products, our PAA formulation works on contact. It breaks down biofilms, kills bacteria, viruses, molds, and spores found in Singapore water systems, and then decomposes into harmless acetic acid and oxygen. This makes it the preferred choice for RO, NF, and UF membrane disinfection in the region.
Why Singapore Industries Choose This Disinfectant:
- Kills Biofilm at Source: Penetrates and destroys biofilm layers that harbor bacteria in RO and UF systems.
- Zero Toxic Residue: Breaks down into food-safe by-products — no rinsing required in most Singapore applications.
- Chlorine-Free Formula: No corrosive attack on stainless steel, membranes, or downstream equipment.
- Pharma & Food Approved: Meets Singapore's strict potable water and pharma-grade purity standards.
- Works in Tropical Heat: Remains effective even in Singapore's year-round warm, humid conditions.
- Complete Material Compatibility: Safe for all standard RO membrane components and housings.
Recommended Dosage & Application in Singapore:
Shock Dose: For immediate system disinfection, use a concentration of 5-10% v/v.
Continuous Dose: For round-the-clock microbial control, maintain a maximum of 2.5ppm on feed water.
Sanitization Procedure: For plants in Singapore, first sanitize the system with permeate water. Circulate the Peracetic Acid solution, followed by a flush with a High pH membrane cleaner for 30 minutes. Allow a soak time of 1-2 hours for deep penetration. Finally, flush the system thoroughly with permeate water before returning the plant to normal service.
Storage & Safety: Peracetic acid is a strong oxidizer. Keep original vented containers in a cool, well-ventilated area at your Singapore facility — away from heat and direct sunlight. For detailed handling protocols and shelf life, refer to the Material Safety Data Sheet (MSDS) and Technical Data Sheet (TDS).