• 2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall New Delhi - 110088, India.
  • :+91-9312-871-070
RO Membrane Preservative for Muscat SWRO Desalination and Industrial Plants - Innova Corporate India

RO Membrane Preservative for Muscat's SWRO & Industrial Plants

Membranes do not like being left alone. When an RO system sits idle for more than 48 hours, the residual water on the membrane surface becomes a breeding ground for bacteria and fungi — especially in Muscat's high ambient temperatures where microbial growth accelerates. Within a few weeks, biofilm can form and cause permanent damage. Innova Corporate (India) manufactures a specialised RO Membrane Preservative for plants in Sohar, Duqm and Salalah, ensuring membranes stay healthy through any shutdown period.

The formulation acts as a protective shield, preventing the growth of bacteria and fungi within the membrane elements. It ensures that the Polyamide or TFC layers remain moist and biologically inactive, allowing for a smooth and efficient system restart without loss of performance or flux. Whether the shutdown is for scheduled maintenance, an annual turnaround, or an extended storage period, this preservative keeps the membrane ready for immediate restart.

Key Features & Strategic Benefits for Local Plants:

  • 48-Hour Protection Threshold: Specifically designed for shutdowns longer than 48 hours where natural protection is no longer sufficient.
  • High-Temperature Stability: Remains effective in the Gulf's elevated ambient temperatures where microbial growth is fastest.
  • Polyamide & TFC Safe: Fully compatible with all major membrane types, preserving the active layer without chemical attack.
  • Biologically Inert: Keeps membranes biologically inactive during storage, preventing biofilm formation.
  • Easy Restart: Simple flush procedure restores the system to normal operation after storage.
  • Shelf-Stable: Long shelf life in original packaging, making it practical for planned maintenance schedules.

Application & Dosage Guidelines:

The application method involves displacing the feed water with a prepared preservative solution. Since requirements vary based on the duration of the shutdown and system size, you are requested to contact our representative for advice on the best dosage and application protocol for your specific plant.

  • Typical Concentration: 1–2% w/w solution in RO permeate water.
  • Application Method: Fill the membrane bank with the prepared solution and seal.
  • Refresh Interval: For storage beyond 3 months, the solution may need to be refreshed.
  • Restart Procedure: Flush thoroughly with permeate water before returning to service.

Where It Is Used in the Region:

Plants across Oman's industrial belt rely on this preservative during planned and unplanned shutdowns. Common applications include:

  • SWRO desalination plants — preserving membranes during seasonal shutdown or maintenance.
  • Oil and gas facilities — protecting RO membranes during annual turnaround in remote operations.
  • Mining operations — storing membranes through planned outages at remote sites.
  • Power and utility plants — preserving boiler feed water RO systems during maintenance.
  • Petrochemical complexes — protecting process water RO systems during shutdowns.
  • Municipal water plants — storage during upgrades or seasonal demand changes.

Handling Measures & Safety Precautions:

Proper human safety gear such as splash goggles, lab coats, vapor respirators, gloves, and boots must be worn while handling and applying chemicals at your site.

* Skin Contact: Wash off with water immediately.
* Eye Contact: Flush with fresh water and seek medical attention immediately.
* Important: Product should not be injected. Please refer to the MSDS for comprehensive safety details.

Storage: This product should be stored in original containers in a cool and dry place, away from sources of heat, flame, and direct sunlight. Refer to the Technical Data Sheet (TDS) and Label for shelf-life information.